Mini trees!

Hey,

Just an update - I wanted more hills for the background to give it abit of perspective. I had some left over hills I made out of foam/hot wire and plaster. I painted these green and made little tiny pine trees out of twigs and fake-bushy-stuff from woodland scenics. They turned out looking pretty cool! (Sorry the pics are kinda bad)
Marnik

The Baron lives!

Yesterday I went shopping and got lots of arty stuff including fake grass, plasticine, new modelling tools and paint.

Let's start off with the Baron's new head! Yay!



Next is the set - I've done alot with this scince I last posted. So first I added a big hill onto the back, and then put the church on, plastering around. I then painted the ground brown/green with watered down acryllics. I then started gluing on the fake grass (pictured below)

I need to re-paint that door on the front, plaster got all over it.
Now I need to add more grass and then tuffs and bushes, trees, a backdrop and I shall be done! I'll post better pictures soon.

Marnik

Sets, trees and sleigh!

Today I started on the rest of the church set - this is once all the snow has melted so it will all be green and grassy. I started by getting the shape I wanted with chicken wire.

Then I covered it in kitchen paper and plaster. This will give it a really nice texture.

And here is it painted - I just used very watered down acryllic. It looks really good but this picture doesn't really look great, I took it when the light was bad.

I'm now gluing little sections with woodland scenics grass!
Next, I started making the army of dead trees I need! They start out as wire:

Wrapped in masking tape,

And will eventually be painted. Here are just a few.

And heres the finished sleigh :D


Thanks!

Marnik

Sleigh!

So heres the finished sleigh:




Or at least I think it's finished, comment with extra ideas! Today I will connect it to the horse, and get started on the lots of dead trees I need!

Marnik

Starting on the sleigh

Hey guys,

To go with the claymation style, I will have to make everything out of clay, or atleast make it look like it is. I decided to make the sleigh out of FIMO clay. Here are my designs:

And here is the structure of the sleigh:

I have now pretty much finished it, but will wait for it to be baked before I take pictures! Hopefully I'll post it here tomorrow!

Keep watching!

Marnik

Deviant art

Hey guys, just posting to say I have got an account on deviant art to put all my best rescent paintings, drawings, so on...

www.marnibob.deviantart.com

Check it out!

Oh and for Munchhausen I've decided to go with a completely different style to my origanal idea - it's going to be claymation sort of like Mark Twain, so I'll have to stock up on plasticine soon! I will still definately use the church...and probably the horse as I won't have any other use for him, and he's pretty cool :D

Marnik

Latex head!

I'm soooo pleased - I wasn't expecting it to come out near perfect, but it did! There are a couple of air bubbles, the most noticable one on the eye, but other then that - just how I wanted it!




What I did while the mask was still in the mold, and I'd only put on a couple of layers was line it with thin alluminium wire, in different angles so it would keep it's shape. This was really good 'cause now I can change the shape of his head, for looks and animation!

More to come!

Marnik

YAAAAAAAAY!

Yay! The mold worked - or at least I think it did...I'll have to see how the latex mask comes out!

I've already started layering latex.

Marnik

Plaster of paris mold made!

This was my first ever try, so fingers crossed it works okay!

Marnik

Beginnings of a head for the baron!

My plan is to make a plaster mold of a plasticine head, make a latex mask in the mold and make an armature for the head.

I havn't yet got any plaster, and before I do, I just thought I would check 'plaster of paris' is the right thing to get....?

Thanks!

Marnik

Finished the church - yeah!

Painting the roof:

And here it is all stuck together and finished:

(sorry if the photo's are abit distorted, my PC's gone weird!)
Well, I say finished...I still need to make 3 steps underneath out of wood, but I've got other stuff that needs doing before then, so that might be a while...

Marnik

More on the church!

Yesterday I made the tower bit on top. Here are the 6 pieces cut out:

And here they are stuck together. I used hot glue and taped over all the edges to make it nicer:

Next I had to make the onion dome. For several reasons, I realised this wasn't going to work, or it would be extremely hard, so instead I made a tiled dome:

And here is it all put together so far. The tower is not glued on:

I also painted the doors, and added knobs made of epoxy-putty, and cardboard crosses. Here is the whole thing (other then the roofs) with its first coat of paint:



Lately I've been noticing that my views have gone down - if anyone's reading this please comment and get other people to come along and join the fun :D

Thanks for looking!


Marnik

More progress on the church!

So I made the main roof and the one above the front door out of wood, then tiled over it with cardboard.

Here it is all constructed so far, all the bits glued together with hot glue.

I made some hinges for the doors, out of cardboard with alluminium wire stuck on top. I hot-glued these to the inside of the doors. They work pretty well, 'cause they are animateableableable(?).

Today I will try and work on the spire.

Marnik

Beginnings of a church set

So the first set I am building for this project is a Russian church. Here was my origanal design:

And here is what I've done so far:

The two doors have not been glued in, I will come up with something so they are able to open.

I am going to spend a good few hours cutting out many many squares now to make the tiles for the roof.
At some point I'm gunna have to come up with how to make the 'onion' on top look right. Also, I'll have to make at least 3 steps all the way around, underneath the church itself.

Marnik

Finished the horse!

The bits on the eyes are called blinkers, horses that pull stuff wear them - just to let you know theyre not some *FAILED* attempt at eyes. This horse will be pulling the baron in a russian sleigh, which I've built half of already. It will be made of FIMO clay, 'cause I now have loads of really nice colours, although I need some more so I'll have to wait untill we next go to town.

Marnik

Baron von Munchhausen

Okay, I told you I'd explain it, so here we go:

For christmas, my grandma got me (and all my cousins) a wonderful, thoughtfull present. It wasn't just a book, it was an old, forgotten story of Baron von Munchhausen. Now she knew these stories scince she was young, but they were all in german, so she had to personally translate them. To add to that, she made them into proper books, with ingraved hard covers, and even a personal message to each person inside! In the origanal books, there were black and white pictures, which, for us, my grandma photoshopped colour into them - wonderful!

Anyway, these stories now feel very close and dear to me, and I deffinately think I should create something in return. What better then to animate the stories! Each one is funny, wild and adventurous.

They are set in the 1700's, of an extrordanary man on his travels from Germany to Russia. I'm sure they'll be very fun to animate!

Here are a couple of exerpts from different parts of the story, with pictures:

Here I am not showing you any of the craaaaazy stuff he does, as I don't want to give much away before animation!

For the snow which is in most of it, I will use lots and lots of white newplast plasticine. This is so I can create footsteps in it, and also as there is a sequence that plasticine will be perfect for the snow!

There is also a small russian church near the begginning, which I have started making today out of wood. I will glue gun the bits together, and cover it in clay.


*******


In other news, I have put lots of layers of paint on the horse:

The paint is just acrylic mixed with latex. If I had more money I would use PAX paint, although latex and acrylic works fine!
I still need to paint the hooves!


Marnik

More progress with the horse!

I've added lots of layers now and overall it looks pretty cool, baring in mind it was my first proper go at the build up technique! The head is too big and the legs don't look right, but other then that it's alright!

I still need to add more mane (tissue paper and latex) and then I can get on with painting him. In the book illustrations he is brown, so I'll go ahead with that!

Marnik

Horses head!

Hey,

I take back what I said about the head in my last post - and went back to the origanal idea of using latex and tissue to build up the head.
Okay so I admit it doesn't look like a horse, but at least I can animate it and it will fit in with the rest of the body...

Tonight I'm gunna try and thin down the neck, add a mane and give the whole horse a new coat of liquid latex.

More to come!!!!!

Marnik

Munchhausen's horse

Hey guys,

For the Baron's horse, I decided to go for something that I hadn't done much of before, the Latex build-up technique. This is where you make the armature, and cover it with foam/sponge, and build up, as if creating muscles. Once you are finished building up with foam you cover the whole thing with liquid latex, in thin layers. This technique was used on all classic stop motion monsters and dinosaurs.

Here are some progress pics:

The horse just required a simple armature, with a tie-down in every foot.

Building up the foam. Up to this point I stuck everything on with hot glue and epoxy.

Now I needed to glue bits that would have to move. I used Latex for this.

The first layer of latex with epoxy hoofs and head now stuck on.

Next, I need to make the head. I started a forum post about this here.

THE CONCLUSION:

What I think I will do is use something along the lines of making the inside of the head out of plastic and wire, to lighten it up abit, and then sculpt it out of something hard, but for the bottom jaw, just leave some wire sticking out. I will then sculpt the bottom jaw with latex and tissue, so that it will be the only moving part of the head - I think that would work!

I will have to give this a go some point today, I'll keep you imformed!

Marnik